Fluid spindle VDI 25 ER11, up to 55,000 rpm
Technical data
Note
reference values. The actual speed depends on the flow rate and the
pressure at the transfer position, and on the type of the cooling
lubricant! During machining, the speed must not fall more than 10% below
the idle speed.
If this limit is exceeded, the load limit is surpassed, and the fluid
spindle must not continue to operate.
Failure to comply may result in short-term spindle failures.
Package includes
- 10213109 Spannmutter ER11-MS (1 Pcs.)
- 12100799 Couvercle (1 Pcs.)
- 10985217 Clé (1 Pcs.)
- 12126975 Clé (1 Pcs.)
- 10648494 Pile, batterie pour broche à fluide (1 Pcs.)
Order information
This product is currently not available to order directly from the store, but can be requested directly from us.
Reparations
One or more repairs can be ordered for this product.
Downloads
Accessories
Dimensions
Assistance à la simulation
Downloads
CAD files
Labels
A4 size labels are specially designed for printing on the following blank labels:
- AVERY Zweckform - General purpose labels - P/N 3427-x
- HERMA - PREMIUM labels - P/N 4626, 4470, 5062, 8645
Accessories
Required for operation
This product is currently not available to order directly from the store, but can be requested directly from us.
Optional accessories
Accessoires de porte-outils
This product is currently not available to order directly from the store, but can be requested directly from us.
This product is currently not available to order directly from the store, but can be requested directly from us.
This product is currently not available to order directly from the store, but can be requested directly from us.
Other accessories
This product is currently not available to order directly from the store, but can be requested directly from us.
This product is currently not available to order directly from the store, but can be requested directly from us.
Dimensions
Assistance à la simulation
La base de données toolsunited contient environ 1 million de données de porte-outils et d’outils de coupe. Des modèles de porte-outils pour les machines INDEX et TRAUB y figurent également et peuvent être utilisés à des fins de simulation.
Toolsunited vous offre les possibilités suivantes :
- Compilation des pièces individuelles nécessaires à la composition de l’outil global
- Assemblage normalisé du porte-outils et de l’outil de coupe sous forme d'un modèle 3D
- Téléchargement des données 3D sous forme d’un outil complet détaillé
- Interfaces normalisées pour de nombreuses solutions logicielles de simulation
Le processus est effectué exclusivement via votre compte INDEX. Aucune connexion séparée n'est nécessaire.
* Sélection gratuite et assemblage sans frais d’outils complets. Le téléchargement de l’outil complet sera facturé.
Enregistrez et connectez-vous maintenant pour utiliser cette fonction.