DataExchange
Overview of the machine data used in iX4.0 options
StatusAnalyser
- Operational/ready
- Machine in production
- Program runs
- Machine at idle
- Automatic starting-up has been activated
- Program interruption by M0 or M01
- End of program / end of job
- NC/PLC errors/warnings/information pending
- NC/PLC errors/warnings/information active
- PLC errors pending with "stop at end of cycle"
- NC errors pending
- EMERGENCY STOP pending
- Material missing
- Hydraulics/auxiliary drives on
- Machine is turned ON -> lifebeat
- Feed override = 0% ? (true/false)
- Feed override = 100% ? (true/false)
- Single block
- Total parts counter actual
- Total parts counter set
- BDE 1-8
StatusMessenger
- Operational/ready
- Machine in production
- Program runs
- Machine at idle
- Automatic starting-up has been activated
- Program interruption by M0 or M01
- End of program / end of job
- NC/PLC errors/warnings/information pending
- NC/PLC errors/warnings/information active
- PLC errors pending with "stop at end of cycle"
- NC errors pending
- EMERGENCY STOP pending
- Material missing
- Hydraulics/auxiliary drives on
- Machine is turned ON -> lifebeat
- Feed override = 0% ? (true/false)
- Feed override = 100% ? (true/false)
- Single block
- Total parts counter actual
- Total parts counter set
- BDE 1-8
AlarmCheck
- Alert message
CrashMonitor
For each spindle:
- Number of collisions
SpindleCheck
Temperatures:
- Hydraulic oil
- Cooling lubricant
- Coolant
- Machine environment
- Control cabinet
Spindle 1 - Spindle 20:
- Spindle name
- Spindle speed
- Spindle load
- Number of clampings
- Motor temperature
TempCheck
Temperatures:
- Hydraulic oil
- Cooling lubricant
- Coolant
- Machine environment
- Control cabinet
LevelCheck
- Hydraulic oil level
- Cooling lubricant level
DriveCheck
Axis 1 - Axis 50:
- Axis name
- Total travel
- Total travel time
- Number of travel processes
- Travel at high speed
- Travel time at high speed
- Number of travel processes at high speed
- Total sum of the jerk
- Total travel time with jerk
- Number of travel processes with jerk
JobManager
- Total parts counter actual
- Workpiece name
- Workpiece-ID
- Internal order number
- Start date
- Start time
- Program name
- Customer
- Customer order number
- Target date
- Target quantity